1-Channel Relay Module
With this 1-channel relay module, you can easily control large loads with 5V from your Arduino or Raspberry Pi. The control lines of the relay are routed on the board to screw terminals. The load to be switched is also connected via screw terminals. For safety reasons, you should only operate the relays up to 30V. Using a jumper, you can switch the control of the relay module from low level trigger to high level trigger.
Technical details:
- Control Voltage IN: 3.3V or 5V DC
- Supply voltage DC+ DC-: 5V DC
- Relay current for switching approx. 5 to 10 mA
- 1x relay (switching power DC: max. 30V/10A, AC: max. 250V/10A)
- Relay with 3 contacts (changeover switch)
- Direct control with microcontroller via digital output (IN on the module)
- 3 screw terminals for connecting the load
- Status LED for displaying the relay status
- 4x mounting holes 3mm
- Size: 50 x 26 x 19mm
- Weight: 18g
Package includes:
1x 1-channel relay module
