M5Stack Fingerprint Unit FPC1020A
The Finger Print Unit from M5Stack is a fingerprint scanner. With the fingerprint sensor, you can easily create access control or an electronic door lock. This all-in-one fingerprint sensor makes adding, verifying, and managing fingerprints very easy. The Uart protocol, compact size, and low power consumption make the sensor very attractive for use with the M5Stack series. The sensor allows for quick fingerprint matching at the highest security level and easy operation.
This unit communicates with the M5Core via the UART protocol and is connected to the M5Core through PORTC.
Download and Links:
- Quick Start Guide
- Official M5Stack Forum
- M5Stack Github Sample Code Arduino
- M5Stack Github Sample Code UiFlow
UART Settings:
- Baud rate default: 19200bps
- Start bits(1 bit)
- Stop bits(1 bit)
- Parity(no)
Technical Details:
- Fingerprint capacity: 1000/1700/2000/3000(Default:1700)
- False Acceptance Rate: <0.001% (Security Level 3)
- False Rejection Rate: <0.1% (Security Level 3)
- Security Level: 1-5 (Default: 3)
- Output format: Username, Finger image, Characteristic value
- Characteristic value size: 193Bytes
- Response time: Fingerprint processing < 0.45s
- Communication interface: UART
- Baud rate: 9600-115200 (Default: 19200)
- Operating temperature: -10°C to 60°C
- Interface: Grove C
- Mounting: Two Lego compatible holes
- Connector plug: PH2.0 4 Pin
- Dimensions: 48 x 24 x 8mm
- Weight: 19g
Package Contents:
- 1x M5Stack Finger Print Unit FPC1020A
- 1x GROVE Cable 20cm
- 1x Storage Box
