800×600 4.3inch e-Ink UART Display
This is a 4.3-inch e-paper display module with a serial interface, a resolution of 800×600, integrated font libraries and extremely low power consumption. The display has a very good viewing angle and can be easily read even in sunlight. A connection cable is included in the delivery, so you can easily connect the display to your Arduino or ESP8266/ESP32.
Features 4.3inch eInk UART Display:
- The representations on the display remain visible even without power supply
- Low power consumption under 5mA
- Easy operation, display of any content via a serial interface, including geometric graphics, texts and images
- Integrated font libraries, supports 32, 48, and 64 dot matrix GBK, Chinese and English fonts
- Built-in 128MB NAND flash, allows storage of font/image data, images can also be stored on an external SD TF card.
- Adjustable baud rate of the serial interface, defaults to 115200 on power up
- Good documentation and example code available on Waveshare Wiki
- Sample programs for Arduino available
Pin Definitions and GDE043A2 Connection
- VCC: 3.3VDC to 5.5VDC
- GND: GND
- DOUT: Serial Data Output
- DIN: Serial Data Input
- WAKE_UP: External Wake Up
- RST: External Reset
Documentation Waveshare eInk Display:
- Wiki:.wiki/4.3inch_e-Paper_UART_Module
Technical Details:
- Display Type: GDE043A2
- SKU: 10628
- Part Number: 4.3inch e-Paper UART Module
- Operating Voltage: 3.3VDC to 5.5VDC
- Interface: UART 115200 bps (bps is adjustable)
- External Dimensions: 118mm × 75mm
- Display Dimensions: 88mm × 66mm
- Pixel Size: 0.11mm × 0.11mm
- Resolution: 800 x 600
- Display Color: Black, White
- Gray Level: 4
- Full Refresh Time: 1.5s
- Viewing Angle:>170°
- Weight: 71g
Package includes:
- 1x 800×600, 4.3inch e-Ink UART Display
- 1x PH2.54mm to 1x6Pin Female Dupont cable 20cm
