FireBeetle Board ESP32-E
The FireBeetle ESP32-E has a power-saving ESP-WROOM-32E microcontroller that was specifically designed for Internet of Things (IoT) projects. This FireBeetle series microcontroller aims at low power IoT nodes, making it quick and easy to build the IoT hardware platform. The electric current in deep-sleep mode only amounts to 10A. The ESP32-E FireBeetle board supports two power supply methods: USB 5V and 3.7V via some external LiPo/Lithium battery. The board also includes a built-in charging regulator for recharging the LiPo battery via USB. The FireBeetle Board-ESP32 has a unique hardware design and is compatible with the Arduino IDE. This allows you to upload programs to the microcontroller without manually switching the boot mode. Pin mapping for the FireBeetle ESP32 is also available in the Arduino IDE. Its small size and high performance make FireBeetle an ideal solution for low power IoT projects. The board also includes a General Display Interface (GDI) which lets you connect the DFRobot display using a ribbon cable.
FireBeetle ESP32-E Features:
- ESP32-E features a data encryption chip to protect the security of the program
- GDI (General Display Interface) for easy connection to DFRobot displays
- On-board RGB LED
- Compatible with Arduino software
- Very low power consumption (the current in DeepSleep is 13A)
- Compact size
- Charging of lithium rechargeable battery (PH2.0 connector) via USB
- Mounting holes present: diameter 2.1mm
Documentation:
- DFRobot Wiki
Pinout FireBeetle ESP32-E:
Technical Details:
- Manufacturer: DFRobot
- Manufacturer SKU: DFR0654
- Logic Level: 3.3V
- Power Supply Operating Voltage: 3.3V to 5.5V (I/O only 3.3V compatible)
- DeepSleep Current: 10A
- Interface: Compatible with the FireBeetle series
- Supports Micropython
- Supports USB charging of Li-Po (JST 2.0mm)
- Max Discharge Current: 600mA
- Max Charging Current: 500mA
- Dual-core Tensilica LX6 microprocessor
- Up to 240MHz clock frequency
- Integrated 802.11 BGN WiFi transceiver
- Integrated dual-mode Bluetooth (BLE and Classic)
- SRAM: 520KB
- Flash: 32Mbit
- Wi-Fi Standard: FCC/CE/TELEC/KCC
- Wi-Fi-Protocol: 802.11 b/g/n/d/d/e/I/k/r (802.11n, high speed can reach up to 150 Mbps)
- Frequency range: 2.4 to 2.5 GHz
- Bluetooth Protocol: Complies with BR/EDR/BLE standard of Bluetooth v4.2.
- Bluetooth Audio: The low power consumption of CVSD and SBC is 10A
- Operating current: 80mA on average
- Support capacitive touch sensor
- Operating temperature: -40°C to +85°C
- Mounting holes diameter: 2.1mm
- Dimension: 25.4 × 60 x 7.2mm
- Weight: 25g
Package Includes:
- 1x FireBeetle Board ESP32-E
- 1x Male Connector 1×18 Pin
- 1x Female Connector with long pins 1×18 Pin
- 1x Male Connector 1×14 Pin
- 1x Female Connector with long pins 1×14 Pin
